Dump Dolly Power, Instructions Manual

Page: 1 / 7

Electric
Power
​
Dump Dolly™
Contents:
Introduction 1
Terminology: 1
Steps: 3
Step 1: Place trash can onto the Power Dump Dolly
​ ™
3
Step 2: Place the Power Dump Dolly onto the dumpster 3
Step 3: Lift trash into the dumpster 4
Step 4: Return carriage to the floor 4
For more information: 5
MANDATORY SAFETY INFORAMTION……………………………………………………………….6
Introduction
​
:
This set of instructions focuses on the Power Dump Dolly and the procedure
it entails to operate it successfully. It will educate any individual on how to
safely empty a trash can, or the equivalent, into a 4 yard, 6 yard, or 8 yard
dumpster with a edge height of 53” or less, or onto a trailer. Without the
control and safety of a Dump Dolly, serious injury can occur when handling
heavy loads above the knees and shoulders. The Power Dump Dolly was
designed
​
in 2012 by Shay Scott,
​
founder of Dump Dolly LLC,
​
to better the
health of individuals who manually lift heavy cans of waste in a commercial
or non-commercial environment.
Terminology:
●
Nose Plate- Metal attached to the bottom of the dolly where can is
placed.
●
Elastic Cord- Secures can to the dolly and is found on the nose plate.
●
Trash Can Clip (anchor)- Adjustable clip that allows can to be attached
securely to the entire dolly. Prevents can from falling into dumpster.
Not intended to use to pull the trash can and dolly backwards.
●
Trash Can Clip Knob- Tightens the trash can clip to secure can. Found
behind trash can clip in back of the dolly.
1