ASSEMBLY INSTRUCTIONS
Table of Contents:
Installation for frames with
aluminum cross braces ................2-3Installation for frames with molded
cross braces .....................................4
www.magliner.com
Page 1: ...ASSEMBLY INSTRUCTIONS Table of Contents Installation for frames with aluminum cross braces 2 3 Installation for frames with molded cross braces 4 www magliner com ...
Page 2: ...ch or table of convenient height and place all components in view and within reach 1 Locate the set of holes near the center of the strap Place one Z bracket against the back of the vertical strap with the short leg oriented towards the bottom of the strap see Figures 1 and 2 Secure with the 1 4 20 x 3 4 long screw C and one hex lock nut F finger tighten only for now 2 Place the vertical strap ass...
Page 3: ...one hex lock nut F 5 Final assembly for all models see Figure 5 a Locate the slots at the top of the vertical strap A Place one Z bracket against the back of the vertical strap with the short leg oriented towards the top Insert one 1 4 20 x 3 4 long screw C through the hole in the Z bracket and the vertical strap finger tighten only for now Adjust the upper Z bracket upward against the bottom of t...
Page 4: ... the vertical strap A see Figure 6 for clarification 2 Slide the vertical strap down through the slots in the middle of the cross brace so that the back of the vertical strap is toward the back of the frame see Figure 7 Make sure that the vertical strap is behind the nose 3 For recess and flush mount noses place the spacer D between the vertical strap and the heel of the nose Insert the 1 4 20 x 1...
