Revision A
September 8
th
2017
OPERATION AND
REMOTE
PROGRAMMING
Easy Flow Operation & Remote Programming Instructions
Thunderstone Manufacturing, LLC.
3400 West O Street
Lincoln, NE 68528
402-435-4249
(Fax) 402-438-3918
www.thunderstonemfg.com
Страница 1: ...ber 8th 2017 OPERATION AND REMOTE PROGRAMMING Easy Flow Operation Remote Programming Instructions Thunderstone Manufacturing LLC 3400 West O Street Lincoln NE 68528 402 435 4249 Fax 402 438 3918 www thunderstonemfg com ...
Страница 2: ...e flashing light 3 Press the Mode button to select Front Hopper Mode First two lights flashing 4 Repeat steps 1 and 2 for each remote to be programmed Up to four remotes can be programmed Have all remotes ready for step 5 and 6 5 Press and hold the Work Light button on the control box for 8 seconds or until the green light starts flashing red 6 If one remote is being programmed press the On Open o...
Страница 3: ...r the rear hopper 6 Power off Control Box when finished Push MODE button to select Front Hopper Mode First two lights flashing Push and hold the ON OPEN and OFF CLOSED buttons on the transmitter simultaneously for 3 seconds or until control box light goes off EZ Flow Cylinder Disconnect Emergency Operation if equipped 1 Locate poppet valve buttons Fig A a Top Button 1 is for front door b Bottom Bu...
