manualshive.com logo in svg

Siemens SINAMICS S110, List Manual, Page: 490 / 1288

Share
Download
Siemens SINAMICS S110 List Manual Download Page 490

Parameter

List of parameters

1-490

© Siemens AG 2012 All Rights Reserved

SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3

[9] = Parameter count through Drive Control Chart (DCC)
[10] = p0107 or p0108

Dependency:

Refer to: r7868, r7870

Note:

Re index 0:
When changing one of the following indices, then the value in this index is incremented.
Re index 1:
Drive object commissioning: When changing either p0107 or p0108, the value in this index is incremented.
Re index 2:
Drive object name. When changing p0199, the value in this index is incremented.
Re index 3:
Drive object structure. When changing a parameter that is relevant for the structure (e.g. number of data sets), the 
value in this index is incremented.
Re index 4:
Drive object BICO interconnections. When changing r3977, the value in this index is incremented.
Re index 5:
Drive object activity: When changing p0105, the value in this index is incremented.
Re index 6:
Drive object, data save.
0: There are no parameter changes to save.
1: There are parameter changes to save.
Re index 8:
Drive object changeover of units. When changing reference or changeover parameters (e.g. p2000, p0304), the 
value in this index is incremented.
Re index 9:
Drive object parameter count. When changing the number of parameters by loading Drive Control Chart (DCC), the 
value in this index is incremented.
Re index 10:
Drive object configuration. When changing either p0107 or p0108, the value in this index is incremented.

Description:

Displays the configuration changes on the drive object.

Index:

[0] = Sum of the following indices
[1] = p0010, p0107 or p0108
[2] = Drive object name (p0199)
[3] = Structure-relevant parameters (e.g. p0180)
[4] = BICO interconnections
[5] = Activate/de-activate drive object
[6] = Data backup required
[7] = Activate/de-activate component
[8] = Reference or changeover parameters (e.g. p2000)
[9] = Parameter count through Drive Control Chart (DCC)
[10] = p0107 or p0108
[11] = p0530 or p0531
[12] = Reserved
[13] = Reserved
[14] = Reserved
[15] = SERVO or VECTOR (e.g. p0300)

Dependency:

Refer to: r7868, r7870

r7871[0...15]

Configuration changes drive object / Config_chng DO

SERVO_S110-CAN, 
SERVO_S110-DP, 
SERVO_S110-PN

Can be changed:

 -

Calculated: 

-

Access level: 

4

Data type: 

Unsigned32

Dynamic index: 

-

Func. diagram: 

-

P-Group: 

-

Units group: 

-

Unit selection: 

-

Not for motor type: 

-

Scaling: 

-

Expert list: 

1

Min Max 

Factory 

setting 

- - 

- 

Summary of Contents for SINAMICS S110









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments