SG-2000 MANUAL
8
The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
©1995, SGC, Inc.
TEL: (206) 746-6310 FAX: (206) 746-6384
DO NOT ATTEMPT TO TRANSMIT UNTIL THE
RADIOTELEPHONE IS WARMED UP FOR AT
LEAST TEN MINUTES.
The crystals that control the operating frequency are contained in a precision oven
that requires 10 minutes to rise to the correct temperature. Transmitting before the
10 minute warm-up period has elapsed may cause a violation of FCC regulations.
Precautions:
1.
Operating and installation personnel must observe all applicable safety
regulations at all times. Do not operate unit without covers in place with power on.
Under certain conditions, dangerous electrical voltages may exist. To avoid injuries,
always confirm removal of power and discharge and ground all circuits before
touching them.
2.
Do not service or adjust equipment when alone. Under no circumstances
should you reach into live equipment for the purposes of adjustment or servicing
unless there is someone else present who is capable of rendering aid.
3.
Personnel working with or near AC power sources, power supplies and high
power radio equipment should be familiar with modern first aid techniques and
resuscitation.
4.
When servicing, observe static discharge precautions to avoid damage to
microprocessors and solid state devices.
5.
When servicing multiple control head installations, disconnect all remote
heads at J-503 on the rear panel of SG-2000 to prevent other personnel from
keying the transmitter during servicing.
SGC reserves the right to change specifications without notice.
2.0 Unpacking
The standard packaging for an SG-2000, the cardboard box and packing materials,
should be retained for future use should the radio need to be shipped elsewhere.