SG-2000 MANUAL
111
The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
©1995, SGC, Inc.
TEL: (206) 746-6310 FAX: (206) 746-6384
Enter the desired parameter by depressing the appropriate
letter. Select the receive frequency and press return; select
the transmit frequency and press return to end function.
C. Programming a channel.
The SG-2000 supports up to 100 user defined channels.
Select the desired channel you wish to program then all of
the parameters in the following manner:
CHANNEL
[A]
MODE
A3H
RX FREQUENCY 0.0
[B]
AUDIO FILTER
VOC
TX FREQUENCY 0.0
[C]
SIDE BAND
USB
[D]
ATTENUATOR
First enter the desired channel you wish to program. Select
the desired parameter by depressing the corresponding
letter. Enter the receive and transmit frequencies. Press
return to end function.
D. Scanning Rate:
Program the scanning rate by using the 'up' or 'down'
arrows to increase or decrease the rate of scan.
E.
Frequency Step:
Program the frequency step by using the 'up' or 'down'
arrows to increase or decrease the step in frequency. A
display of .5 means that frequency changes are made at .5
KHz increments. A step of 5 means 5 KHz steps, and so
forth.
F.
Time:
Program the time in the following format: hr : min : sec.
G.
Date:
Program the date in the following format month-day-year,
i.e., 01-01-92.