SG-2000 MANUAL
107
The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
©1995, SGC, Inc.
TEL: (206) 746-6310 FAX: (206) 746-6384
17.4
RS-232 Software Main Menu Operations
The following operations are accessible from the Main Menu (see page 92).
A.
Change channel
Press "A" then enter the desired channel you wish to use.
B.
Change frequency
Press "B" then enter the new frequency or use the 'up' or
'down' arrows to step through the frequencies. Transmit
and receive frequencies may be selected independently if
desired.
C.
Program Radio Functions
Press "C" and the software will present a sub menu which
will prompt you to enter specific information as follows:
Program Sub Menu
[A] SCAN BANK
[E] FREQUENCY STEP
[B] TIMER
[F] TIME
[C] CHANNEL
[G] DATE
[D] SCANNING RATE
NOTE: This sub menu is covered in Section 17.6, “RS-232
Software Programming Functions.”
D.
Scan
Press "D" and the Scan Menu is presented:
[A] FREQUENCY
[B] CHANNEL BANKS
For either frequency or channel bank scanning use the up or
down arrow to change direction of the scan. To stop
scanning, simply press the space bar.
E.
Change Mode
Press "E" and you will toggle through various modes of
operation.