Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 50 / 374

Getting Started With Autotest CTS55
1094.0006.55 3.12 E-7
Status message
Phase RMS: run
Phase PK : run
Frequency : run
Ramp : run
Step 10
The phase and frequency errors
as well as the power ramp are
measured during this step.
Status message
Phase RMS: pass
Phase PK : pass
Frequency : pass
Ramp : pass
This message shows when the
test step is complete.
-------------------------------------------------------------------------------- -------------------------------------------
Status message
BER : run
Step 11
RBER II : run
RBER Ib : run
FER : run
Performing a bit error rate
measurement (BER).
Status message
BER : pass
RBER II : pass
RBER Ib : pass
FER : pass
This message shows when the
test step is complete.
-------------------------------------------------------------------------------- -------------------------------------------
Step 12 to 16
This is a repetition of the tests
eight to twelve for the second
user defined channel.
-------------------------------------------------------------------------------- -------------------------------------------
Status message
Network Release: run
Step 17
The speech link is cleared down
by CTS.
Status message
Network Release:
The link has been cleared down
correctly.
--------------------------------------------------------------------------------- --------------------------------------------