Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 225 / 374

CTS55 List of Commands/Annex C
1094.0006.55 C.21 E-8
1.5.2 Power
1.5.2.1 Tolerances for Power
Setting Power Template to Configurable or Recommendations
Syntax: CALCulate:LIMit:POWer[:TEMPlate]:SET?
Return:
REC | GSM Recommendations
CONFIG | Configurable
State:
Set: IDLE
Query: ALL
Option: none With Query Default: CONFIG
Resetting to default values
Syntax: CALCulate:LIMit:POWer[:TEMPlate]:CLEar
State: ALL Option: none No Query Note: Resets the GSM, GSM850,DCS1800 and DCS1900 tolerances
Tolerances for average power in the power time template
Syntax: CALCulate:LIMit:POWer[:TEMPlate]:TOLerance1[:DATA] <numeric_value>
CALCulate:LIMit:POWer[:TEMPlate]:TOLerance2[:DATA] <numeric_value>
Value range: Deviation from expected value
GSM:
CALC:LIM:POW:TOL1
0.0 ... +9.9 dB with maximum power control level
CALC:LIM:POW:TOL2 0.0 ... +9.9 dB with all other power control levels
GSM850:
CALC:LIM:POW:TOL1
0.0 ... +9.9 dB with maximum power control level
CALC:LIM:POW:TOL2 0.0 ... +9.9 dB with all other power control levels
DCS1800 and DCS1900:
CALC:LIM:POW:TOL1
0.0 ... +9.0 dB with maximum power control level
CALC:LIM:POW:TOL2 0.0 ... +9.0 dB up to power control level 8
Default:
GSM:
TOL1 +2.0
dB
TOL2 +3.0 dB
GSM850:
TOL1 +2.0
dB
TOL2 +3.0 dB
DCS1800:
TOL1 +3.0
dB
TOL2 +3.0 dB
DCS1900:
TOL1 +3.0
dB
TOL2 +4.0 dB
State: ALL Option: none With Query Note: The deviations always apply symmetrically about the expected value