Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 183 / 374

CTS55 Remote Control
1094.0006.55 11.23 E-5
11.9 Examples
Example 1: Call to a mobile phone with measurements
Send the following commands to the CTS via a terminal program:
Command Comment
procedure:select?
procedure:select MANUAL
selects the Manual Test
procedure:select?
procedure:call:toms
Call to Mobile
procedure:select?
procedure:set:arfcn 60
set RF frequency to chan 60
(902 MHz uplink)
procedure:set:power:ms 10 set mobile to PowerControlLevel = 10
procedure:set:arfcn?
procedure:set:power:ms?
read:ber:clib? BER measurement
read:ber:clib:rber?
read:array:burst:power?
Burst Power measurement
(Power time template)
read:burst:phase:error:rms? measurement phase error rms
read:burst:phase:error:peak? measurement phase error peak
read:burst:frequency:error? measurement frequency error
read:burst:timing:error? measurement burst timing error
procedure:select?
procedure:set:arfcn 70
change to channel 70 (904 MHz)
procedure:set:power:ms 14 change to PCL = 14 (15 dBm)
procedure:set:arfcn?
procedure:set:power:ms?
read:ber:clib? Do the same measurement as above
read:ber:clib:rber?
read:array:burst:power?
read:burst:phase:error:rms?
read:burst:phase:error:peak?
read:burst:frequency:error?
read:burst:timing:error?
procedure:release:toms Release Call
procedure:select?
procedure:select NONE
procedure:select?