Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 205 / 374

CTS55 List of Commands/Annex C
1094.0006.55 C.1 E-8
1 List of Commands / Remote Control
1.1 General Information
1.1.1 States
In the description of the commands, the following abbreviations are used for indication of the
permissible states:
IDLE:
..Initial state of the CTS; is also achieved by means of PROCedure:SELect[:TEST] NONE.
MIDL: MS test selected (BCCH is generated)
MSYN: MS test: Synchronised (Location update is finished)
MCE: MS test: Call established
MOD: Module test in idle state
IQSP: IQ-spectrum active
RFG: RF generator active
BAN: Burst Analysis active
ALL: All states (IDLE, MIDL, MSYN, MCE, MOD, IQSP, BAN, or RFG)
The following diagram explains the individual transitions of states:
IDLE
MIDL
MOD
RFG
IQSP
BAN
MSYN
MCE
PROC:SEL MANUAL
PROC:SEL MODIDLE
LOCATION UPDATE
PROC:SEL RFG PROC:SEL RFG
CALL TO OR
FROM MOBILE
PROC:SEL NONE
PROC:SEL NONE
PROC:SEL IQSPEC
PROC:SEL BANALYSIS
PROC:SEL MODIDLE
PROC:SEL IQSPEC
PROC:SEL BANALYSIS
PROC:SEL MODIDLE