Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 140 / 374

Description of the Menus CTS55
1094.0006.55 9.32 E-7
9.9.2 Config BS Signal
This menu is used to change the main Parameters dedicated to the Manual Test, which are:
•
The channel number of the Control Channel ( Control Chan ). This is the channel on which the CTS
sends out the control information. The control channel is needed by the mobile to synchronise on the
CTS.
•
The channel number of the Traffic Channel ( Traffic Chan ). This is the channel on which the speech
connection is established (see Call Established Menu).
•
The level of the traffic channel ( Traffic Level ). This is the level at which the CTS transmits the traffic
channel.
•
The output power level of the mobile station ( Mobile Power ). This is the output level with which the
mobile transmits to the CTS.
The mobile’s output power can be given in two different units (dBm or PCL). The unit is selected in the
Mobile Power Unit field.
The Power Ramp template can be configurable where the user specifies the tolerance limits (Config
Power Ramp Menu) or set the tolerances according to the GSM Recommendations. This option is
selected in the
Ramp Tolerance field.
Default
With the "Default" key all fields of this menu can be reset to factory default values.