Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 289 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 33 E-3
6.5 GSM Report Display
In the GSM report display mode, GSM measurement results are displayed like on a hardcopy.
However, contrary to the print preview, paging is not shown. Depending on the length of the
measurement report and the resolution of your graphics card, the displayed section may have to be
moved through the report display with the aid of the horizontal and vertical
scrollbars. To optimize the displayed section, the size of the report can be
reduced or expanded. To do so use a zoom command in the report display or
select the command via the popup menu of the report display. This mode of
CTSgo is used to display recorded measurement reports. For this reason, the
sequence control is not active and the program is in the stop mode. The report
mode is selected by opening a stored measurement report in the File menu by
Drag & Drop, ie by drawing the icon of a measurement report into the CTSgo
window with the left mouse key held down and then releasing the key. The drag &
drop function will be described in a separate section.
CTSgo does not support “OLE“, ie the display of a measurement report within
another application, eg word processing. Measurement results may however be
exported for further processing. The displayed measurement report can also be
output to a printer.
Note:
Only one measurement report can be displayed at a time.
Fig.: GSM report display
Fig.: Popup menu
in report display