Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 127 / 374

CTS55 Description of the Menus
1094.0006.55 9.19 E-7
9.7.4 MS Test/Updated Menu
Test/updated Menu - Single Band MS Test/updated Menu - Dual Band MS
After a successful Location Update this screen appears. On the right side of the display essential data of
the mobile is displayed. This data has been recorded during the Location Update.
•
IMSI (International Mobile Subscription Identity)
This is the phone number of the mobile station.
•
IMEI (International Mobile Equipment Identity)
This is an unique number to identify the each mobile station.
•
Power Class and Frequency Capability
The Power Class of the mobile station defines the maximum transmit level of mobile station. The
according transmit level is displayed right to the Power Class. The CTS now has the ability to
display Power Classes and Frequency Capability for a single and dual band MS.
P-GSM850 4 33 dBm
P-GSM900 4 33 dBm
GSM1800 1 30 dBm
The display will show the 1
st
power class of the originating network (network in which Location
Updated) and the 2
nd
power class as the secondary network.
The 2
nd
Power Class and Frequency Capability will not be shown for single band and
GSM900/1900 dual-band MS.
The frequency Capability for the MS Type will indicate the following:
GSM850 Indicates GSM850 Frequency Capability
P-GSM900 Indicates Primary GSM900 Frequency Capability
E-GSM900 Indicates Extended and Primary GSM900 Frequency Capability
R-GSM900 Indicates R-GSM (Railway GSM) Frequency Capability
GSM1800 Indicates GSM1800 Frequency Capability
GSM1900
Indicates GSM1900 Frequency Capability
In this screen either the mobile can be called by the CTS or the CTS can be called by the mobile. To call
the mobile the softkey "Call to mobile" key has to be pressed. To call the CTS the user has to dial a
number at the connected mobile and has to press the call button.