Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 203 / 374

CTS55 List of Error Messages/Annex B
1094.0006.55 B.3 E-3
Continuation: Command Error
Error code
Error text in the case of queue poll
Error explanation
-151
Invalid string data
The command contains a faulty string.
Example:An END message has been received prior to the terminating apostrophe.
-158
String data not allowed
The command contains a valid string at a position which is not allowed.
Example: A text parameter is set in quotation marks,
SOURce:RFGen:SELect "SETting1"
-161
Invalid block data
The command contains faulty block data.
Example: An END message was received prior to reception of the expected number of data.
-168
Block data not allowed
The command contains valid block data at an impermissible position.
Example:
-171
Invalid expression
The command contains an invalid mathematical expression.
Example: the expression contains mismatching parentheses.
-178
Expression data not allowed
The command contains a mathematical expression at an impermissible position.
Example:
-180 Macro error
A faulty macro has been defined, or an error has occurred during execution of a macro.
Execution Error - Error on execution of a command; sets bit 4 in the ESR register
Error code Error text in the case of queue poll
Error explanation
-200
Execution error
Error on execution of the command.
-221
Settings conflict
There is a conflict between setting of parameter value and instrument state.
Example: External attenuation has been set in a state other than IDLE.
-222
Data out of range
The parameter value lies out of the permissible range of the instrument.
Eample: The command *RCL only permits entries in the range from 0 to 50.
-223
Too much data
The command contains too many data.
Example: The instrument does not have sufficient storage space.
-241
Hardware missing
The command cannot be executed due to missing hardware.
Example: An option is not fitted.