Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 296 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 40 E-3
7.1.8 Export Data
The user may want to work with a measurement report in another Windows application.
To do so, select this command to open a dialog window where the desired directory can be selected
and the file assigned a new name. The standard extension of export data is .DAT. Data are stored in
tabulated form. Columns are separated by a tabulator, rows by carriage return (CR). Since the number
format may differ from country to country, numerals are stored in the format selected in your operating
system. The measurement reports can thus be read as a word file but also by spreadsheet programs
or data bases.
Note:
If the number format is set incorrectly in the system control, problems may occur when data are
imported. In this case, decimal points are interpreted as commas at 1000s digits. So, measured values
will be incorrect by several orders of magnitude. This should be borne in mind particularly when
transferring data from German-speaking to English-speaking countries.
7.1.9 Application Mode
This command opens a dialog window where the GSM autotest and GSM module test or the DECT
autotest can be selected. Click on Cancel to remain in the presently active mode.
Note:
The report display mode is activated by selecting the Open command in the File menu.
7.1.10 Load Configuration
All set configurations can be saved for subsequent use. With this command, saved configuration files
can be loaded. Configuration files are assigned the extension .CFG.
Note
The previously used configurations can also be selected in the popup menu using the righthand mouse
key.
Fig.: Application mode dialog window
Popup menu Module test Popup menu Autotest