Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 216 / 374

List of Commands/Annex C CTS55
1094.0006.55 C.12 E-8
Checking the dualband handover with GSM900/GSM1800
Syntax: CONFigure:SIGNalling:HANDover:CHECK <value>
Value
range: SLOW | with handover check of the mobile
FAST | without handover check of the mobile
Default:
SLOW
State:
Set: IDLE
Query: ALL
Option:
none
With Query Note:
The selected setting is taken into account
when a handover between GSM900 and
GSM1800 is selected
Dualband handover mode
Syntax:
CONFigure:SIGNalling:HANDover:MODE <value>
Value range:
BCCH | with control channel after handover
LEVEL | without control channel after handover
Default:
LEVEL
State:
Set: IDLE
Query: ALL
Option:
none
With Query
Note:
Handover is initiated by using Change of channel for TCH.
Configurable SMS message
Syntax:
configure:sms?
Value range: Message content or “No Message” Default:
State:
Set: ALL
Query: ALL
Option: none With
Query
Returns the SMS message content sent by the MS to the CTS
and resets it to “No Message”
Syntax:
configure:user:sms[?]
Value range:
Message content
Default:
State:
Set: ALL
Query: ALL
Option: none With
Query
Set the SMS message content to be sent from the MS to the
CTS.
Syntax: procedure:set:sms:oa:length[?]
Value range: 2 - 12 Default: 2
State:
Set: ALL
Query: ALL
Option: none With
Query
Set the length of the TP Originator field of the SMS message to
be sent from the CTS to the MS