Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 86 / 374

Getting Started With Manual Test CTS55
1094.0006.55 6.12 E-6
Phase Frequency Menu
After selecting "Phase Freq" by
pressing the "Measure Select"
key and starting the measu-
rement ("Start Measure") in the
Call Established menu the
Phase Frequency menu with the
detailed measurement results will
be displayed.
e
6.4 Receiver Measurements
Step 1
In the Call Established menu
press "Measure Select" until BER
is highlighted. Pressing "Start
Measure" will change the screen
to the one shown opposite. The
RxLev and RxQual values
measured by the mobile phone
and reported to the CTS are
displayed and continuously
updated.
Also the bit rate is constantly
displayed. This is the average
value over the current number of
samples. The RBER II, RBER Ib
and FER averages are shown as
percentages.