Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 236 / 374

List of Commands/Annex C CTS55
1094.0006.55 C.32 E-8
Configure number of blocks for the BLER measurement
Syntax: CONFigure:GPRS:BLER:BLOCkstosend[?]
Value range:
10 - 9999
Default: 1000
State: IDLE,MSYN Option: K4 With query Note :
GPRS BLER measurement on/off
Syntax: CONFigure:GPRS:BLER:State[?]
Value range: ON,OFF Default:
State: MSYN Option: K4 With query Note : This command does establish and
release TBF and changes the state of the
instrument to BLER.
Measured values of the error rate
Syntax:
Execute new
measurement and signal result
Read result only
READ:GPRS:BLER:ERROrrate[?]
FETCh:GPRS:BLER:ERROrrate[?]
Value range: 0 ... 100 (Unit: %) Default:
State: BLER Option: K4 With query Note : If a read is performed on BLER, all
subsequent fetches will return error rate
value until a BLER read is carried out.
Measured values of the data rate
Syntax:
Execute new
measurement and signal result
Read result only
READ:GPRS:BLER:DATArate[?]
FETCh:GPRS:BLER:DATArate[?]
Value range: Default:
State: BLER Option: K4
With query
Note : If a read is performed on BLER, all
subsequent fetches will return data rate
value until a BLER read is carried out.