Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 154 / 374

Description of the Menus CTS55
1094.0006.55 9.46 E-7
9.9.13.3 Handover Mode
If the current network selection is GSM900/1800 or GSM900/1900 then the HANDOVER MODE softkey
is available.
Two modes of dual-band handover are defined:
a) Separate
The Control Channel (required for location update) on the original network is dropped, leaving only the
Traffic Channel (required for call established/measurements) on the new network.
b) Combined
The Control Channel (required for location update) remains on the original network, and the Traffic
Channel (required for call established/measurements) is on the new network.
The Handover mode option is also used within the Config MS Type and MS Type Edit (section 9.9.5).
The Handover mode option within this menu will take precedence over Handover mode set in the Config
MS Type menu if the coupler is set to OFF (see 9.7.3 Select MS Type Menu).