Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 325 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 69 E-3
7.5.4 FP Test Set 1
Within the test sets, you can determine the measurements to be performed for a traffic bearer. To this
end, enter the carrier of the traffic bearer to be used in the first input field. You may as well enter the
carrier offset. In addition, the slot to be used can also be defined in the respective field. Select the
tests to be performed within the frames “RX Measurements” and “TX Measurements” by checking the
respective boxes.
The assignment of frequencies and channel and offset values can be obtained from the table below:
Chan-
nel
0 1 2 3 4 5 6 7 8 9
Offset -3 1902.528 1900.800 1899.072 1897.344 1895.616 1893.888 1892.160 1890.432 1888.704 1886.976
-2.5 1901.664 1899.936 1898.208 1896.480 1894.752 1893.024 1891.296 1889.568 1887.840 1886.112
-2 1900.800 1899.072 1897.344 1895.616 1893.888 1892.160 1890.432 1888.704 1886.976 1885.248
-1.5 1899.936 1898.208 1896.480 1894.752 1893.024 1891.296 1889.568 1887.840 1886.112 1884.384
-1 1899.072 1897.344 1895.616 1893.888 1892.160 1890.432 1888.704 1886.976 1885.248 1883.520
-0,5 1898.208 1896.480 1894.752 1893.024 1891.296 1889.568 1887.840 1886.112 1884.384 1882.656
0 1897.344 1895.616 1893.888 1892.160 1890.432 1888.704 1886.976 1885.248 1883.520 1881.792
0,5 1896.480 1894.752 1893.024 1891.296 1889.568 1887.840 1886.112 1884.384 1882.656 1880.928
1 1895.616 1893.888 1892.160 1890.432 1888.704 1886.976 1885.248 1883.520 1881.792 1880.064
1.5 1894.752 1893.024 1891.296 1889.568 1887.840 1886.112 1884.384 1882.656 1880.928 1879.200
2 1893.888 1892.160 1890.432 1888.704 1886.976 1885.248 1883.520 1881.792 1880.064 1878.336
2.5 1893.024 1891.296 1889.568 1887.840 1886.112 1884.384 1882.656 1880.928 1879.200 1877.472
3 1892.160 1890.432 1888.704 1886.976 1885.248 1883.520 1881.792 1880.064 1878.336 1876.608
Fig.: Configure DECT FP Test Set 1 dialog