Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 97 / 374

CTS55 Module Test
1094.0006.55 7.7 E-5
7.4.4 Other Measurements
Using the "Select" softkey followed by "Start" enters a new menu. These new menus are for the "Power
Ramp" measurement, the "Phase Frequency" measurement and control of the "RF Signal Generator".
The two measurements are described below. For details of the "RF Signal Generator" menu refer to
section 7.6.
7.4.4.1 Power Ramp
Power Ramp Menu
The Power Ramp measurement is similar to that in Manual Test, as described in section 9.7.6. The
template configuration is tied to the Manual Test values.
Exp. Power
The power that you expect to be received by the CTS. This value aids the system’s search for the
signal.
Freq
This defines the receive frequency to use.
While the CTS is searching for the mobile’s signal a small symbol (AR, standing for Auto Ranging) will
appear at the top of the menu. This symbol will disappear when the signal has been found and
measurements are being made.