Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 293 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 37 E-3
7 Program Menus
This section describes the commands available in the CTSgo menus. If a command can also be called
via the toolbar, its icon is displayed below the headline. A command can also be called via a popup
menu when the following line is displayed below the headline.
Popup menus are context-sensitive, ie they only contain commands that are relevant to the current
program status.
7.1 File Menu
7.1.1 Open
With this command, a stored measurement report is opened. A dialog is displayed where the desired
file can be selected. You may have to change the directory in this dialog window. After the selection of
a measurement report, the program changes to the report display mode. Measurement reports are
normally stored in files with the extension .MRP on the hard disk or any other storage medium. The
program automatically differentiates between DECT measurement reports and GSM measurement
reports.
7.1.2 Close
This command permits to return from the report display mode to the autotest or module test mode. If
the displayed measurement report is not yet stored, the user will be prompted to do so.
Popup menu Module test Popup menu Report display
Popup menu Autotest
Fig.: File menu
Popup menu Report display
Popup Menu Report display