Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 70 / 374

Getting Started With Quicktest CTS55
1094.0006.55 5.4 E-6
Quicktest Main Menu
Step 3
After pressing the "Start" key in
the home menu the Quicktest
main menu is opened.
Select the mobile type from the
list using the "MS Type" keys to
scroll through the list.
In this menu are displayed the
New External Attenuation Set-
tings for a “low”, “mid” and
“high” Band. Please See Sec-
tion 9.9.5 Config MS Type. The
“low”, “mid” and “high” channel
boundaries are dependent on
the test network being used.
For the Quicktest the coupler
must be switched off ("off").
Press "Start" to start the test
sequence.
g
.
Quicktest Menu (Test)
After pressing the "Start" key in
the Quicktest Main Menu the
menu shown opposite appears.
The CTS is now transmitting the
control channel (BCCH) and
waits for the mobile to synchro-
nise to the signal (location up-
date on the CTS). This process
is called Location Update and is
indicated by the symbol in the
left window. The fact that this
process is running is indicated
by the yellow background.
Switch on the mobile and enter
the PIN number after the
prompt.
As soon as the mobile has syn-
chronised successfully the
background of the symbol
changes to green. An error in
the location update is indicated
by a red background.
h
,
i
.