Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 44 / 374

Getting Started With Autotest CTS55
1094.0006.55 3.6 E-7
Autotest Start Menu
Step 3
After pressing the "Start" key in
the Home Menu the Autotest
Start Menu screen is displayed.
Select the mobile type from the
list using the "MS Type" keys to
scroll through the list.
Use the "Mode" key from within
the Config menu to select step
or continuous test mode.
For the following sequence the
required settings are Mode =
Cont and Coupler = off. Press
the "Start" key to begin with the
test sequence.
Autotest Running Menu
After pressing the "Start" key in
the Autotest Start Menu the
screen shown opposite appears.
CTS is now transmitting the
control channel and waits for the
mobile to synchronise to the
CTS (Location Update).
Switch on the Mobile and enter
the PIN number when requested
to do so.
As soon as the mobile is
synchronised the LocUpd box
will show a " ".