Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 364 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 108 E-3
15 Adapting the Appearance of CTSgo
The user-defined graphics integration described before is also possible in a large display field of the
main dialog instead of in a popup window. For this purpose, bit 15 must be set in the initialization file
“CTS_GO.INI“ in the Application Settings section for Options.
[Application Settings]
Options
Bit 15 = 1 (corresponds to 08000
hex
)
Since the size of the main dialog can be varied, the ideal size of the graphics file cannot be specified in
greater detail. The graphics display is always increased or reduced to a size that fits exactly into the
output window. The graphics should not be overwritten in each test point, as otherwise the
measurement rate would be reduced. The graphics display remains active until a new entry is found in
the sequence or the test run is terminated.
If the dialog window is not increased, kindly use the values for the resolution 640x480 pixels.
Approximate reference values can be obtained from the following table.
Screen size BMP Graphics
640x480 pixels 496x139 pixels
800x600 pixels 756x215 pixels
1024x768 pixels 980x327 pixels