Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 94 / 374

Module Test CTS55
1094.0006.55 7.4 E-5
7.4 Burst Analysis
7.4.1 Configuration
Conf. Burst Analysis Menu
The "Conf. Burst Analysis" menu is available via both the main configuration menu and within Module
Test itself, from the "Module Test" menu. Configuration of the values is done by using the softkeys.
Trigger Mode
The CTS needs to detect when a burst occurs. This can be done either by detecting the rising edge of
the burst (Power) or by synchronisation with the midamble (Free Run).
RF Unit
The receive frequency can be set on the "Burst Analysis" menu by entering it either as a channel
number or as a frequency. The unit used is selected by
RF Unit .
SPM Offset
This is a calibration parameter for the Sensitive Power Measurement. The value can be set
automatically by using the Calibrate SPM button from the Burst Analysis menu. It also can be adjusted
manually.