Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 124 / 374

Description of the Menus CTS55
1094.0006.55 9.16 E-7
9.7 Manual Test Menus
9.7.1 MS Test/Wait Sync Menu
This menu appears when the Manual Test is activated. The BCCH information is transmitted on the
Control channel and the CTS waits for a Location Update or for a call from the mobile station.
On the top left side of the menu important Manual Test settings are indicated, these are:
•
the external attenuation between the mobile and the CTS for the selected mobile type
•
the chosen Control Channel Number and the Traffic Channel Number
•
the CTS transmit level for the traffic channel
On the right hand side the selected mobile type is displayed. Above this is an indicator for the coupler
state. On signifies that a coupler is used and the attenuations defined for the selected mobile type is
taken into account. Off signifies that no coupler is used. Therefore the attenuations are set to zero.
When the mobile station starts a Location Update or a makes a call the power received from the mobile
is indicated by the power indicator bar and an appropriate message for "Location Update in progress" or
"Call from the mobile in progress" starts to blink.
Select MS Type
By pressing this key the local configuration menu for selecting the mobile type and to switch the coupler
on and off can be reached.
Config
By pressing this key the local configuration menu for the base station signal and the network parameters
can be reached.