Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 144 / 374

Description of the Menus CTS55
1094.0006.55 9.36 E-7
Installing CTS New MS Types over pre X2.06.3 CTS MS Types
Upon the first installation of the X2.06.5 Software onto a CTS with software previous to X2.06.3 then the
CTS will do a simple conversion routine to retain the previous MS Type lists. The input / output
attenuations associated to a MS Type will be duplicate for each „low“, „mid“ and „high“ entries.
For Example:
Old MS Type Setting for a Mobile Type defined within GSM900 only.
Name: MS_Z10
Input Att: 5.3 dB
Output Att: 12.2 dB
Output Att2: 16.2 dB
Sensitivity at: -102 dBm
Starting Time: ON
Then the corresponding X2.06.5 MS Setting will be:
Name: Nokia2110
GSM850 GSM850
Low Input Att: 0.0 dB Low Output Att: 0.0 dB
Mid Input Att: 0.0 dB Mid Output Att: 0.0 dB
High Input Att: 0.0 dB High Output Att: 0.0 dB
GSM900 GSM900
Low Input Att: 5.3 dB Low Output Att: 12.2 dB
Mid Input Att: 5.3 dB Mid Output Att: 12.2 dB
High Input Att: 5.3 dB High Output Att: 12.2 dB
GSM1800 GSM1800
Low Input Att: 0.0 dB Low Output Att: 0.0 dB
Mid Input Att:
0.0 dB
Mid Output Att:
0.0 dB
High Input Att:
0.0 dB
High Output Att:
0.0 dB
GSM1900 GSM1900
Low Input Att:
0.0 dB
Low Output Att:
0.0 dB
Mid Input Att:
0.0 dB
Mid Output Att:
0.0 dB
High Input Att:
0.0 dB
High Output Att:
0.0 dB
Sensitivity at:
-102 dBm
Starting Time:
ON
Output Att2
16.2 dB
Handover Mode:
Separate
The CTS will only support a maximum of 100 MS Types.
The MS Type will transfer attenuations only for the network in which it was inserted (created). The other
networks will show default settings.