Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 369 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 113 E-3
It is not recommended to change the values manually as in this case the CTSgo software may not run
correctly.
16.16 Can Configuration Overwriting be Avoided?
Stored configuration files should be protected against overwriting. The best thing to do so is to write-
protect these files in the operating system. To this end, open the Windows Explorer or the file
manager, click on the file and select Properties. Check the Read only box.
16.17 Can Default Values be Loaded?
Terminate CTSgo and delete the initialization file “CTS_GO.INI“. When the program is started again,
default values will be loaded. Note that thus all values are reset, even your own settings.
[DECT Selected Tests] Key=
FP Tests 0001
hex
FP Test Set 1 0002
hex
FP Test Set 2 0004
hex
FP Test Set 3 0008
hex
FP Test Set 4 0010
hex
FP Test Set 5 0020
hex
FP Test Set 6 0040
hex
PP Tests 0080
hex
PP Test Set 7 0100
hex
PP Test Set 8 0200
hex
PP Test Set 9 0400
hex
PP Test Set 10 0800
hex
PP Test Set 11 1000
hex
PP Test Set 12 2000
hex
[DECT Test Set x] Measurements=
NTP 00001
hex
Power ramp 00002
hex
Graphics Template 00004
hex
Frequency offset 00008
hex
B-field Modulation 00010
hex
Graphics Modulation 00020
hex
Frequency drift 00040
hex
Timing 00080
hex
Jitter 00100
hex
Echo test 00200
hex
BER 00400
hex
FER 00800
hex