Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 320 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 64 E-3
The IQ spectrum parameter set can be assigned a short name in the Name field. This short name
appears both in the submenu and in the labeling of the buttons of the module test dialog window. The
associated network is determined for the parameter set by clicking on “GSM900“, “GSM1800“ and
“GSM1900“ in the respective field. The parameter set also includes the input attenuation which can be
varied in the respective field.
After completing all configurations press OK to send the settings to the CTS. If you do not want to
change the current IQ spectrum settings of the CTS press Cancel.
7.4.5 Remote Port
The same dialog window as for the GSM autotest is displayed. For further information refer to the
respective chapter of the GSM autotest.
7.4.6 Change Password
The same dialog window as for the GSM autotest is displayed. For further information refer to the
respective chapter of the GSM autotest.