Rohde & Schwarz 1094.0006.50, Operating Manual

Page: 98 / 374

Module Test CTS55
1094.0006.55 7.8 E-5
7.4.4.2 Phase Frequency
Phase Frequency Menu
The Phase Frequency measurement is similar to that in Manual Test, as described in section 9.7.7. The
template configuration is tied to the Manual Test values.
Exp. Power
The power that you expect to be received by the CTS. This value aids the system’s search for the
signal.
Freq
This defines the receive frequency to use.
Ignore Guard/Eval Guard
A choice can be made whether Guard Bits are included in the phase frequenz evaluation.
While the CTS is searching for the mobile’s signal a small symbol (AR, standing for Auto Ranging) will
appear at the top of the menu. This symbol will disappear when the signal has been found and
measurements are being made.