Ricoh Aficio MP C3002 User Manual Download

Page: 215 / 830

Loading Paper into Tray 3 (LCT)

• When paper loaded in the right side of Tray 3 (LCT) runs out, paper on the left is automatically

shifted to the right. Do not pull out Tray 3 (LCT) while the tray is moving paper; wait until sounds
stop coming from the tray.

• For the right stack, align the right edge of the paper with the right edge of the tray. For the left

stack, align the left edge of the paper to the left edge of the tray.

•

(mainly Europe and Asia)

Tray 3 (LCT) can hold A4 paper only. If you want to print on 8

× 11 from Tray 3 (LCT),

contact your service representative.

•

(mainly North America)

Tray 3 (LCT) can hold 8

× 11 paper only. If you want to print on A4 from Tray 3 (LCT),

contact your service representative.

Carefully pull out Tray 3 (LCT) until it stops.

CJW015

Square the paper and load it print side up.

Do not stack paper over the limit mark.

• Whole tray pulled out

CJW016

9. Adding Paper and Toner

144

Summary of Contents for Aficio MP C3002































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP C3002

Reviews:

Related manuals for Aficio MP C3002

Brands by name

Popular brands

Ricoh Aficio MP C3002, User Manual

Search results

Summary of Contents for Aficio MP C3002

Reviews:

Related manuals for Aficio MP C3002

Brands by name

Popular brands