Polycom RealPresence RMX 4000 Administrator'S Manual Download Page 683

Page: 683 / 1101

RMX Manager Application

Polycom®, Inc.

652

Guidelines

●

The Collaboration Server Installation and First Entry Configuration must be completed before

installing the RMX Manager application.

For more details, see the

Polycom RealPresence Collaboration Server (RMX) 1500/1800/2000/4000

Getting Started Guide

●

When upgrading the RMX Manager application, it is recommended to backup the MCU list using the

Export RMX Manager Configuration

option.

For more details, see

Import/Export RMX Manager Configuration

●

When upgrading the RMX Manager from a major version (for example, version 8.7.0) to a

maintenance version of that version (for example, 8.7.0.x), the installation must be performed from

the same MCU (IP address) from which the major version was installed.

●

If you are upgrading from another MCU (different IP address), you must first uninstall the RMX

Manager application from the Windows Control Panel.

Accessing or Downloading the RMX Manager Installer

The RMX Manager installer can be downloaded or accessed and installed on your workstations using one
of the following methods:

●

Accessing the RMX Manager Application Installer Directly from the MCU

●

Downloading the RMX Manager application from the Polycom web site at

http://www.polycom.com/support

and installing it. The Installation procedure is the same as if you

have downloaded the application from the Login screen.

●

Accessing the RMX Manager Installer from the Login screen

Accessing the RMX Manager Application Installer Directly from the MCU

Start Internet Explorer and in your browser enter:

http://<Collaboration Server IP Address>/RMXManager.html

For example, if the Collaboration Server IP address is 10.226.10.46, enter in the browser the

following address:

http://10.226.10.46/RMXManager.html

The

RMX Manager

installation page is displayed.

The RMX manager can be installed for use by multiple users on a shared workstation. For more
information, see

Installing the RMX Manager for Multi-User Capability

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RealPresence RMX 4000

Reviews:

Related manuals for RealPresence RMX 4000

Brands by name

Popular brands

Polycom RealPresence RMX 4000, Administrator'S Manual

Search results

Summary of Contents for RealPresence RMX 4000

Reviews:

Related manuals for RealPresence RMX 4000

Brands by name

Popular brands