manualshive.com logo in svg

Polycom RealPresence RMX 4000, Administrator'S Manual

The Polycom RealPresence RMX 4000 is a high-end conferencing solution that offers a seamless collaboration experience. Unlock its full potential by referring to the comprehensive Hardware Manual available for free download on our website, ensuring you maximize the capabilities of this exceptional product.

Share
Download
background image

Contents

Polycom, Inc. 

ix

Setting a Transit Entry Queue   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  280

IVR Provider Entry Queue (Shared Number Dialing)  . . . . . . . . . . . . . . . . . . . . . . . . . . .  281

Call Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  281
Guidelines for setting the Entry Queue as IVR Provider . . . . . . . . . . . . . . . . . . . . . .  281
Configuring the Collaboration Server as IVR Provider  . . . . . . . . . . . . . . . . . . . . . . .  281

Using External IVR Services via the MCCF-IVR Package  . . . . . . . . . . . . . . . . . . . . . . .  282

Call Flows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  283
Guidelines for Using External IVR Services via the MCCF-IVR Package   . . . . . . . .  284
Configuring the MCU to Support External IVR Services via the MCCF-IVR   . . . . . .  285
Configuring the Entry Queue to Use External IVR Services . . . . . . . . . . . . . . . . . . .  285

SIP Factories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  286

Creating SIP Factories   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  286

SIP Registration & Presence for Entry Queues and SIP Factories with SIP Servers  . . . . . .  288

Guidelines for registering Entry Queues and SIP Factories with SIP Servers  . . . . .  288

Monitoring Registration Status   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  289

Ad Hoc Conferencing   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  289

Gateway to Polycom® Distributed Media Application™ (DMA™) 7000  . . . . . . . . . . . . .  290

Address Book  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  291

Viewing the Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  292

Displaying and Hiding the Group Members in the Navigation Pane  . . . . . . . . . . . . . . . .  293
Participants List Pane Information   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  293
Displaying and Hiding the Address Book   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  294

Adding Participants from the Address Book   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  294

Adding Individual Participants from the Address Book to Conferences   . . . . . . . . . . . . .  294
Adding a Group from the Address Book to Conferences   . . . . . . . . . . . . . . . . . . . . . . . .  295

Participant Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  295

Managing Groups in the Address Book   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  295

Managing the Address Book  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  297

Guidelines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  297
Adding a Participant to the Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  297
Adding a New participant to the Address Book Directly  . . . . . . . . . . . . . . . . . . . . . . . . .  297

Substituting E.164 Number in Dial String  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  303

Adding a Participant from an Ongoing Conference to the Address Book  . . . . . . . . . . . .  303
Modifying Participants in the Address Book  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  304
Deleting Participants from the Address Book  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  305
Copying or Moving a Participant  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  306
Searching the Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  307
Filtering the Address Book   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  307

Filtering Address Book Data Using a Predefined Pattern . . . . . . . . . . . . . . . . . . . . .  308

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RealPresence RMX 4000

Magnavox AZ8350 - Cd Radio Cass Recorder Operating Instructions Manual preview
AZ8350 - Cd Radio Cass Recorder
Brand: Magnavox Pages: 18
Jensen Mobile Multimedia AM/FM/DVD Receiver VM9311 Instruction Manual preview
Mobile Multimedia AM/FM/DVD Receiver VM9311
Brand: Jensen Pages: 90
Fisher digital slim -1400 Instruction Manual preview
digital slim -1400
Brand: Fisher Pages: 20
Advantech AIIS-1440 User Manual preview
AIIS-1440
Brand: Advantech Pages: 82
YARMEE YC837 Instruction Manual preview
YC837
Brand: YARMEE Pages: 7
American Audio Lab GO-210 TUTTI User Manual preview
GO-210 TUTTI
Brand: American Audio Lab Pages: 31
Vansco DIGI-TRACK Manual preview
DIGI-TRACK
Brand: Vansco Pages: 11
Delco ETR 2000 series User Manual preview
ETR 2000 series
Brand: Delco Pages: 34
Ferguson HearMe CD250BT Instruction Manual preview
HearMe CD250BT
Brand: Ferguson Pages: 13
Aiwa CX-NA71 Operating Instructions Manual preview
CX-NA71
Brand: Aiwa Pages: 80
Symetrix Prism 0x0 Quick Start Manual preview
Prism 0x0
Brand: Symetrix Pages: 4
Powerdist DECS125-15 Replacement Manual preview
DECS125-15
Brand: Powerdist Pages: 7
H&B HF-275 Operating Instructions Manual preview
HF-275
Brand: H&B Pages: 9
Precision Planting 20/20 SeedSense Operator'S Manual preview
20/20 SeedSense
Brand: Precision Planting Pages: 65
Ediseja 21 CMU 200 / HACx2 . 485x1 . FOTx39 - 12 User Manual preview
CMU 200 / HACx2 . 485x1 . FOTx39 - 12
Brand: Ediseja 21 Pages: 20
Bosch B420 Setup & Troubleshooting preview
B420
Brand: Bosch Pages: 23
Kenwood XD-355 Instruction Manual preview
XD-355
Brand: Kenwood Pages: 40
Kenwood RXD-V333 Service Manual preview
RXD-V333
Brand: Kenwood Pages: 43

Brands by name

Popular brands

Load more brands