manualshive.com logo in svg

Polycom RealPresence RMX 4000, Administrator'S Manual

The Polycom RealPresence RMX 4000 is a high-end conferencing solution that offers a seamless collaboration experience. Unlock its full potential by referring to the comprehensive Hardware Manual available for free download on our website, ensuring you maximize the capabilities of this exceptional product.

Share
Download
background image

Contents

Polycom, Inc. 

xx

Resource Reports for Collaboration Server 1800 and 2000/4000 with MPMRx . . . .  706

Resource Capacities in AVC CP, SVC and Mixed Mode Conferences in MPMx 

Card Configuration Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  708

Resource Capacities in AVC CP, SVC and Mixed Mode Conferences in MPMRx 

Card Configuration Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  708

Collaboration Server 1800 Resource Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  708
Collaboration Server 2000/4000 Resource Capacity  . . . . . . . . . . . . . . . . . . . . . . . .  710

ISDN/PSTN  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  710

MCU Resource Management by RealPresence Resource Manager, and 

Polycom RealPresence DMA System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  711

Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  711

Port Usage Threshold  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  712

Setting the Port Usage Threshold   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  712
SIP Dial-in Busy Notification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  713

Port Usage Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  714

System Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  716
SNMP (Simple Network Management Protocol)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  717

MIBs (Management Information Base)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  717
Traps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  717

Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  717

MIB Files  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  717

Private MIBs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  717
Support for MIB-II Sections   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  718
The Alarm-MIB  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  718
H.341-MIB (H.341 – H.323)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  718
Standard MIBs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  718
Unified MIB  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  719

Traps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  721

Status Trap  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  722
RMX MIB entities that do not generate traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  722

Defining the SNMP Parameters in the Collaboration Server   . . . . . . . . . . . . . . . . . . . . .  724

Audible Alarms   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  731

Using Audible Alarms  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  731

Audible Alarm Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  732
Stop Repeating Message  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  732

Configuring the Audible Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  732

User Customization   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  732
Replacing the Audible Alarm File  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  733

Multilingual Setting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  734

Customizing the Multilingual Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  734

Banner Display and Customization  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  735

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RealPresence RMX 4000

NEC ElectraElite IPK Installation And Maintenance Manual preview
ElectraElite IPK
Brand: NEC Pages: 20
3M XT-1 Technical Data preview
XT-1
Brand: 3M Pages: 2
3M XT-1 Technical Bulletin preview
XT-1
Brand: 3M Pages: 2
JBL Authentics L8 Owner'S Manual preview
Authentics L8
Brand: JBL Pages: 16
JBL Authentics L 16 Owner'S Manual preview
Authentics L 16
Brand: JBL Pages: 17
Absima CR9T Quick Start preview
CR9T
Brand: Absima Pages: 5
GSK 983Ma-H Connection Manual preview
983Ma-H
Brand: GSK Pages: 32
Gemini GLS-550 Important Safety Instructions Manual preview
GLS-550
Brand: Gemini Pages: 7
Powerdist DECS125-15 Replacement Manual preview
DECS125-15
Brand: Powerdist Pages: 7
Quanser Q2-USB Quick Start Manual preview
Q2-USB
Brand: Quanser Pages: 4
Sharp UX-CD600 Operation Manual preview
UX-CD600
Brand: Sharp Pages: 50
RCA RD2056A User Manual preview
RD2056A
Brand: RCA Pages: 18
Techno CNC Systems HD Mini User Manual preview
HD Mini
Brand: Techno CNC Systems Pages: 67
Technics SD-S7225 Operating Instructions Manual preview
SD-S7225
Brand: Technics Pages: 60
Technics RS-CH900 Operating Instructions Manual preview
RS-CH900
Brand: Technics Pages: 79
Centroid Acorn CNC Start Here preview
Acorn CNC
Brand: Centroid Pages: 2
Chatter Box BiT-3 Manual preview
BiT-3
Brand: Chatter Box Pages: 24
jWIN JX JX-CD8700 JX-CD8700 Owner'S Manual preview
JX JX-CD8700 JX-CD8700
Brand: jWIN Pages: 10

Brands by name

Popular brands

Load more brands