Polycom RealPresence RMX 4000, Administrator'S Manual

Page: 513 / 1101

IP Network Services
Polycom, Inc. 482
5 Modify the following fields:
Default Management Network Service – Routers
Field Description
Default Router IP
Address IPv4 Enter the IP address of the default router. The default router
is used whenever the defined static routers are not able to
route packets to their destination. The default router is also
used when host access is restricted to one default router.
IPv6
Static Routes
(IPv4 Only Table) The system uses Static Routes to search other networks
for endpoint addresses that are not found on the local LAN.
Up to five routers can be defined in addition to the Default
Router. The order in which the routers appear in the list
determines the order in which the system looks for the
endpoints on the various networks. If the address is in the
local subnet, no router is used.
To define a static route (starting with the first), click the
appropriate column and enter the required value.
Router IP
Address Enter the IP address of the router.
Remote IP
Address Enter the IP address of the entity to be reached outside the
local network. The
Remote Type determines whether this
entity is a specific component (Host) or a network.
• If Host is selected in the Remote Type field, enter the IP
address of the endpoint.
• If Network is selected in the Remote Type field, enter of
the segment of the other network.
Remote Subnet
Mask Enter the subnet mask of the remote network.
Remote Type Select the type of router connection:
• Network – defines a connection to a router segment in
another network.
• Host – defines a direct connection to an endpoint found
on another network.