Polycom RealPresence RMX 4000 Administrator'S Manual Download Page 641 | Manualshive

Page: 641 / 1101

background image

IVR Services

Polycom®, Inc.

610

External IVR Service Control

IVR Services can be controlled externally from an application server supporting the MCCF-IVR (Media
Control Channel Framework-Interactive Voice Response) package. The external IVR service is currently
being implemented with the integration of the Polycom RealPresence Virtualization Manager (DMA) as the
application server. When the application server is deployed in the enterprise environment and the Polycom
RealPresence Collaboration Server (MCU) is deployed as a media server, the external IVR service can be
used to play audio messages, display slides, and collect DTMF input from the participant.

For more information, see

Using External IVR Services via the MCCF-IVR Package

.

IVR Services Support with TIP Protocol

From Version 8.1, Conference IVR and Entry Queue IVR Services are supported with AVC TIP protocol in
conferences that include both TIP-enabled and non-TIP-enabled endpoints. TIP-enabled endpoints can be
moved from the Entry Queue to the destination conference if the

TIP Compatibility Modes

settings in the

Profile are identical for both conferencing entities (it is recommended to use the same

Profile

for both

entities).

The IVR services can be enabled in

Prefer TIP

TIP Compatibility Modes.

IVR media files, WAV for voice messages and JPG for video slides, are all stored on the RealPresence
Collaboration Server (RMX).

Guidelines for TIP Support with IVR Services

●

AVC SIP and TIP protocols are supported on the RealPresence Collaboration Server

1500/2000/4000 only.

●

IVR default audio files are enabled in

Prefer TIP

TIP Compatibility Modes.

●

TIP-enabled endpoints can send DTMF digits to MCU.

●

In a mixed TIP environment, there is no support for content in cascaded conferences. Additionally,

Legacy and Lync endpoints cannot view content.

«
...
639
640
641
642
643
...
»

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RealPresence RMX 4000

Brand: Tait Pages: 3

Brand: Zeck Audio Pages: 16

Brand: Simplex Pages: 40

Brand: Bame Pages: 12

Brand: Haken Audio Pages: 7

Brand: Creator Electronics Pages: 20

Brand: Emerson Pages: 22

Brand: Emerson Pages: 22

Brand: Emerson Pages: 27

Brand: Emerson Pages: 30

Brand: Emerson Pages: 27

Brand: Emerson Pages: 40

Brand: Emerson Pages: 44

Brand: Emerson Pages: 44

Brand: SoundRyder Audio Pages: 20

Brand: Sharp Pages: 40

Brand: NEC Pages: 1098

Brand: Sailor Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands