Polycom RealPresence RMX 4000 Administrator'S Manual Download Page 160 | Manualshive

Page: 160 / 1101

background image

Sharing Content During Conferences

Polycom®, Inc.

129

Content Sharing Using H.239 Protocol

This protocol is used by H.323 and ISDN endpoints.

The H.239 protocol allows compliant endpoints to share content stream simultaneously with video.

Cascaded links declare H.239 capabilities, and are supported in Star and MIH cascading topologies. For
more details, see

Cascading Conferences - H.239-enabled MIH Topology

.

Content sharing is supported only during conferencing (not while in Entry Queue).

Content Sharing Using BFCP Protocol

This protocol is used by SIP endpoints.

The MCU supports BFCP over either TCP or UDP, which enables the MCU to share content with both SIP
client types.

Guidelines for Using SIP BFCP Content

For SIP clients supporting BFCP/TCP or BFCP/UDP:

●

BFCP content is not supported over SIP links (in Gateway and cascading scenarios). Therefore, in

cascading environment, the cascaded link must be defined as H.323 for content to be shared.

●

BFCP/UDP is supported in both IPv4 and IPv6 addressing modes. BFCP/TCP is supported only in

IPv4 addressing mode.

●

Note that Lync endpoints, though considered as SIP endpoints, do not use BFCP to share content,

and use a Microsoft proprietary protocol for that purpose. There are two options to bypass that

limitation:



Polycom CSS plug-in (see

Content Sharing via Polycom CSS Plug-in for Microsoft Lync Clients

).

This is the preferred option, and is used whenever the CSS plug-in is currently used.



Treating Lync endpoints as Legacy, thus viewing content via the people video layout (see

Sending

Content to Legacy Endpoints

).

●

BFCP utilizes an unsecured channel (port 60002/TCP) even when SIP TLS is enabled. If security is

of higher priority than SIP content sharing, SIP/BFCP can be disabled by manually adding the

ENABLE_SIP_PEOPLE_ PLUS_CONTENT system flag, and setting its value to NO.

●

SIP and BFCP capabilities are by default declared to all endpoints.
Capabilities declaration is controlled by the ENABLE_SIP_PPC_FOR_ALL_USER_AGENT system

flag, whose default value is YES, meaning BFCP capability is declared to all vendors’ endpoints.

When set to NO, the MCU declares SIP over BFCP capabilities only to Polycom and Avaya

endpoints. Note that a SIP proxy might remove the agent information, thus preventing the capability

declaration to Polycom and Avaya endpoints as well.

●

Set ENABLE_FLOW_CONTROL_REINVITE system flag to NO when SIP BFCP is enabled.

●

If the system flags mentioned above do not exist in the system, they must be manually added (see

Modifying System Flags

).

Note that since TIP compatible conferences

(see

TIP Compatibility - Prefer TIP

)

use H.264 as

content media protocol, endpoints supporting only H.263 are considered Legacy content endpoints
(see

Sending Content to Legacy Endpoints

), regardless of the control protocol they are using.

«
...
158
159
160
161
162
...
»

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RealPresence RMX 4000

Brand: Zenith Pages: 14

Brand: Badger Meter Pages: 48

Brand: iHome Pages: 17

Brand: Clatronic Pages: 38

Brand: V-ZUG Pages: 24

TALENT STATION TS-4

Brand: Wheatstone Pages: 33

Brand: Honeywell Pages: 4

Brand: AudioBahn Pages: 14

Brand: Philips Pages: 94

Brand: Sharp Pages: 32

Brand: PTN Pages: 34

Brand: Generex Pages: 166

Brand: CoachComm Pages: 115

Brand: Curtis Pages: 1

Brand: Curtis Pages: 9

Brand: Curtis Pages: 10

Brand: CoachComm Pages: 62

Brand: VDO Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands