Polycom RealPresence RMX 4000 Administrator'S Manual Download Page 115 | Manualshive

Page: 115 / 1101

background image

Defining AVC-Based Conference Profiles

Polycom®, Inc.

84



Display the SIP DisplayName field.
or
Display the SIP Address (SIP application server).
or
Display the SIP ContactDisplay field.
or
Display nothing if all the fields are empty.



For a defined H.320 participant (Collaboration Server 1500/2000/4000):



The system displays the name from the participant definition.



For an undefined H.320 participant:



Display the Terminal Command String (TCS-2) to identify the participant.
or
Display nothing if the string is not received or empty.

●

If the endpoint Display Name is changed in the Collaboration Server Web Client, it overrides all the

above.

You can control the display of the site names by defining the font, size, color, background color and
transparency and position within the video window in the

Profile - Site Name

dialog box.

Guidelines

●

Site Names display is Off by default in a new profile.

●

Site Names can be enabled to function in one of two modes:



Auto

– Site names are displayed for 10 seconds whenever the conference layout changes.



On

– Site names are displayed for the duration of the conference.

●

During the display of the site names, the video frame rate is slightly reduced

●

Site Names display is not available for Video Switching (VSW) conferences.

●

Site Names display characteristics (position, size, color) can by modified during an ongoing

conference using the

Conference Properties - Site Names

dialog box. Changes are immediately

visible to all participants.

●

Site Names display text and background color is dependent on the Skin selected for the conference:



Plain Skins

- Site Names text is displayed without a background.



Picture Skins

- Site Names text is displayed with a background.

Shorten the Site Name Display

The

SIP_OMIT_DOMAIN_FROM_PARTY_NAME

System Flag can be used to remove Domain Names

from SIP dial-in participants’ Site Names. This prevents long domain names being appended to SIP
participant names, as frequently happens when the Collaboration Server is used with a DMA.

The flag must be manually added to the System Configuration and its value modified as follows:

●

YES

(Default) - The domain name is omitted from SIP dial-in participant names.

●

NO

- The domain name remains as part of SIP dial-in participant names.

For more information, see

Modifying System Flags

.

«
...
113
114
115
116
117
...
»

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RealPresence RMX 4000

Brand: ZETRON Pages: 3

Brand: M-Audio Pages: 12

AQUIS ULTRAFLOW

Brand: Waterous Pages: 217

Brand: Contec Pages: 15

Brand: eMoMo Pages: 2

Brand: Joyonway Pages: 8

Brand: HEIDENHAIN Pages: 64

RealPresence Centro

Brand: Polycom Pages: 53

Brand: Ziton Pages: 2

Brand: B&R Industries Pages: 16

Brand: Allmatic Pages: 32

Termix VVX-I-R FI - 7 Series

Brand: Danfoss Pages: 32

Brand: RCA Pages: 68

DCN-CONCM Concentus

Brand: Bosch Pages: 2

DCN Next Generation 4.41

Brand: Bosch Pages: 14

DCN-CON Concentus Delegate Unit

Brand: Bosch Pages: 2

Brand: Bosch Pages: 46

Brand: Bosch Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands