Ultra Secure Mode
Polycom®, Inc.
866
●
Changes to the White List are written to the Auditor Event File.
●
Alterations to the White List do not require a system reset.
Enabling, Disabling and Modifying the White List
The use of White List in the environment can be enabled or disabled in the Management Network Service
- White List dialog box.
To enable, disable, view or modify the White List:
1
In the
RMX Management
pane, click the
IP Network Services
.
The
IP Network Services
pane is displayed.
2
In the
IP Network Services
list pane, double-click the
Management Network
entry.
The
Management Network
dialog box is displayed.
3
Click the
WhiteList
tab.
The
WhiteList
dialog box is displayed.
If there are no entries in the
White List,
it is disabled to prevent lock out.
If the
White List
is disabled none of the
IP
addresses in the list are displayed.
The
Add
and
Remove
buttons are only active if the
Enable Whitelist
check box is selected.
4
Select the
Enable Whitelist
check box.
All
IP
addresses in the list are displayed and the
Add
and
Remove
buttons become active.
5
Modify the
White List
.
Both
IPv4
and
IPv6
addresses are supported and the system will only allow an entry of the type of
IP
addresses for which the
Management Network Service
is configured according to the table
below.
Summary of Contents for RealPresence RMX 4000
Page 135: ...Defining SVC and Mixed CP and SVC Conference Profiles Polycom Inc 104 12 Click the IVR tab ...
Page 468: ...Conference and Participant Monitoring Polycom Inc 437 ...
Page 578: ...Network Security Polycom Inc 547 3 Define the following fields ...
Page 992: ...Appendix D Ad Hoc Conferencing and External Database Authentication Polycom Inc 961 ...