manualshive.com logo in svg

Polycom RealPresence RMX 4000, Administrator'S Manual

The Polycom RealPresence RMX 4000 is a high-end conferencing solution that offers a seamless collaboration experience. Unlock its full potential by referring to the comprehensive Hardware Manual available for free download on our website, ensuring you maximize the capabilities of this exceptional product.

Share
Download
background image

 

Sharing Content During Conferences

Polycom®, Inc. 

139

Guidelines for Sending Content to Legacy Endpoints

●

A separate HD video resource is allocated to the conference for content sending to legacy endpoints.
Allocation is performed only once a legacy content endpoint is connected to the conference, and a 

content session is initiated and transmitted via the people video layout. Once the resource is 

allocated, it remains allocated to the conference until its end. 
If the system cannot allocate the resource required for sending the content, the conference status 

changes to Content Resource Deficiency, and content cannot be sent to the legacy endpoints.

●

Endpoints receiving content via the people video layout, use the same video protocol and resolution 

they use for receiving video.

●

Content cannot be sent to Legacy endpoints when Same Layout mode is selected for the conference.

●

This option in not supported in Video Switching conferences.

●

Content can be sent to Legacy endpoints in gateway calls, depending on content configuration on 

Master/Slave MCUs (for example, if the gateway conference is using H.263 content media protocol, 

and the conference MCU is using H.264 content media protocol).

●

FX endpoints dialing into the MCU, share content via the content channel (Content), whereas 

FX endpoints dialing out to the MCU, view content via the people video layout.

Content Display on Legacy Endpoints

When content is sent to content legacy endpoints, their video layout automatically changes to the content 
layout defined by the system flag LEGACY_EP_CONTENT_DEFAULT_LAYOUT (default layout is 

 - 

CP_LAYOUT_1P4VER), and the content is shown in the larger/top-left cell. The video layouts of the other 
conference participants do not change. (To modify the default layout, see 

LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag

.)

The switch to the content layout occurs in Auto Layout, Presentation Mode, Lecture Mode, and when a 
layout is selected for the conference. 

In Lecture Mode, when content is sent to legacy endpoints, switching to the content layout, results in the 
content shown in the lecturer/speaker window, while the lecturer is shown in the second window. If the layout 
contains more than two windows, all other windows are empty. The non-lecturer legacy content participants 
see the lecturer in full screen.

When content is stopped, the layout of the legacy participants terminates as well.

Legacy participants can change their layout using Click&View. In such a case, the content is forced to the 
larger/top-left cell.

The Collaboration Server user can also change the layout for the legacy content endpoints participants 
(selecting personal layout).

When forcing a video participant to the Content window (instead of Content), the Content display can be 
restored only by selecting any other video layout.

Sending Content to Legacy Endpoints in Telepresence Mode

To ignore personal layouts during Telepresence conferences (while working with MLA), set the value of the 
flag FORCE_LEGACY_EP_CONTENT_LAYOUT_ON_TELEPRESENCE to YES.

If the layout for displaying content in Legacy endpoints include multiples cells, MCU may populate 
Telepresence room streams sources in remote cells.

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RealPresence RMX 4000

E-Mu 1616 PCI Manual preview
1616 PCI
Brand: E-Mu Pages: 72
E-Mu 1212M Tutorials Manual preview
1212M
Brand: E-Mu Pages: 44
COMMUNICATIONS-APPLIED TECHNOLOGY ICRI/2P Setup And Operating Procedures preview
ICRI/2P
Brand: COMMUNICATIONS-APPLIED TECHNOLOGY Pages: 30
Prology MDN-2410 Service Manual preview
MDN-2410
Brand: Prology Pages: 31
Parklio CHAIN User Manual preview
CHAIN
Brand: Parklio Pages: 12
Caberg just speak Instructions For Use Manual preview
just speak
Brand: Caberg Pages: 146
Grundig Varixx UMS 4401 SPCD Manual preview
Varixx UMS 4401 SPCD
Brand: Grundig Pages: 47
Grundig scd 5290 rds Service Manual preview
scd 5290 rds
Brand: Grundig Pages: 34
J-Tech Digital QuickShare User Manual preview
QuickShare
Brand: J-Tech Digital Pages: 18
Laguna Tools SmartShop Maker Owner'S Manual preview
SmartShop Maker
Brand: Laguna Tools Pages: 70
Raven SCS 460 Operator'S Manual preview
SCS 460
Brand: Raven Pages: 47
Emerson ES28 Owner'S Manual preview
ES28
Brand: Emerson Pages: 22
Emerson ES27 Owner'S Manual preview
ES27
Brand: Emerson Pages: 22
Emerson ES13 Owner'S Manual preview
ES13
Brand: Emerson Pages: 27
Emerson ES128 Owner'S Manual preview
ES128
Brand: Emerson Pages: 30
Emerson CKD9906 Owner'S Manual preview
CKD9906
Brand: Emerson Pages: 27
Emerson ES3 Owner'S Manual preview
ES3
Brand: Emerson Pages: 40
Emerson ES30 Owner'S Manual preview
ES30
Brand: Emerson Pages: 44

Brands by name

Popular brands

Load more brands