Polycom RealPresence RMX 4000, Administrator'S Manual

Page: 968 / 1101

Appendix C - CDR Fields, Unformatted File
Polycom®, Inc. 937
Chair Not supported.
Always contains the value
0 .
Video Protocol The video protocol, as follows:
1 - H.261
2 - H.263
4 - H.264
255 -

Auto
Broadcasting
Volume The broadcasting volume assigned to the participant.
The value is between
1 (lowest) and 10 (loudest).
Each unit movement increases or decreases the volume by 3 dB .
Undefined
Participant Indicates whether are not the participant is an undefined participant, as follows:
0 - The participant is not an undefined participant.
2 - The participant is an undefined participant.
Node Type The node type, as follows:
0 - MCU
1 - Terminal
Bonding Phone
Number Note: This field is only relevant to ISDN/PSTN participants.
The phone number for Bonding dial-out calls.
Bonding is a communication protocol that aggregates from two up to thirty 64 Kbps B
channels together, to look like one large bandwidth channel.
Video Bit Rate The video bit rate in units of kilobits per second.
A value of
4294967295 denotes auto, and in this case, the rate is computed by the MCU.
IP Address Note: This field is only relevant to IP participants.
The IP address of the participant.
An address of
4294967295 indicates that no IP address was specified for the participant, and
the gatekeeper is used for routing. In all other cases the address overrides the gatekeeper.
Signaling Port Note: This field is only relevant to IP participants.
The signaling port used for participant connection.
A value of
65535 is ignored by MCU.
H.323 Participant
Alias Type/SIP
Participant Address
Type Note: This field is only relevant to IP participants.
For H.323 participants, the alias type, as follows:
7 - E164
8 - H.323 ID
13 - Email ID
14 - Participant number
For SIP participants, the address type, as follows:
1 - SIP URI
2 - Tel URL
Event Fields for Event 18 - NEW UNDEFINED PARTICIPANT
Field Description