Polycom RealPresence RMX 4000 Administrator'S Manual Download Page 374

Page: 374 / 1101

Operator Assistance & Participant Move

Polycom®, Inc.

343

In the

Profile

field, select a Profile in which the

Operator Conference

option is selected.

Upon selection of the Operator Conference Profile, the

Display Name

is automatically taken from the

Collaboration Server User Login Name. This name cannot be modified.
Only one Operator conference can be created for each User Login name.

Define the following parameters:

New Conference – General Options

Field

Description

Duration

Define the duration of the conference in hours using the format HH:MM (default
01:00).

Notes:

•

The Operator conference is automatically extended up to a maximum of 168
hours. Therefore, the default duration can be used.

•

This field is displayed in all tabs.

Summary of Contents for RealPresence RMX 4000














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RealPresence RMX 4000

Reviews:

Related manuals for RealPresence RMX 4000

Brands by name

Popular brands

Polycom RealPresence RMX 4000, Administrator'S Manual

Search results

Summary of Contents for RealPresence RMX 4000

Reviews:

Related manuals for RealPresence RMX 4000

Brands by name

Popular brands