Polycom RealPresence RMX 4000, Administrator'S Manual

Page: 156 / 1101

Video Protocols and Resolution Configuration for CP Conferencing
Polycom®, Inc. 125
w448p Resolution
For improved interoperability with Tandberg MXP 990/3000 endpoints, the appropriate System Flag settings
will force the Collaboration Server to send w448p (768x448 pixels) at 25fps as a replacement resolution for
WSD15 (848x480) and SD15 (720x576 pixels).
Guidelines
●
The w448p resolution is supported:

In CP mode.

At conference line rates of 384kbps and 512kbps.

With H.323, SIP, and ISDN endpoints.
H.323 endpoints must identify themselves as Tandberg MXP during capabilities exchange.

In all Video Layouts.

In 1x1 Layout:

When Video Clarity is Off , the Collaboration Server transmits the same resolution as it
receives.
 When Video Clarity is On , the Collaboration Server changes the transmitted resolution to
w448p.
For more information see Video Clarity™ .
●
Resource consumption for the w 448p resolution is the same as for SD and WSD resolutions.
The following table lists the video outputs from the Collaboration Server to the Tandberg Endpoints for both
16:9 Aspect Ratio when the w448p resolution is enabled.
The following table list the video outputs from the Collaboration Server to the Tandberg Endpoints for 4:3
Aspect Ratio when the w448p resolution is enabled.
Video Output to Tandberg Endpoints- Aspect Ratio 16:9
Network
Environment
Video Quality
Line
Rate
Kbps
Resolution
Frame
Rate
fps
Resolutio
n Frame
Rate fps
Tandberg
Collaboration
Server Tandberg to
Collaboration Server Collaboration Server
to Tandberg
H.323
SIP Motion Sharpness 384 512x288 30 768x448 25
512 768x448 30 768x448 25
H.323
SIP Sharpness
*
Sharpness 384 1024x576 15 768x448 25
512 1024x576 15 768x448 25
*
It is recommend to set the endpoint to Motion to ensure the transmission of the higher frame rates of 25fps/30fps
to the Collaboration Server.