![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335235.webp)
233
Z550
Operation Manual
S
E
CT
IO
N 6
Tim
ing Ch
arts
SECTION 6
Communication with External Devices
Timing Chart 12
Measurement is performed according to the CAPTURE command of the RS-232C, and
measurement values are accumulated and output according to the specified logging conditions.
When the hold conditions are specified, the corresponding values are held, accumulated, and
then output.
Assuming the sampling interval is set to three samples
*1 ALL-PASS and ERROR outputs are always output at the timing of "no hold" is set.
*2 The GATE output does not function at logging.
Measurement mode
Hold&Logging
Trigger measurement
(RS-232C)
Logging
Terminal block output
Analog output
(OUT for which hold is set)
PROFILE data
(sent by Controller)
Terminal block output (*1)
Analog output
(OUT for which no hold is set)
Accumulated data
(OUT for which no hold is set)
GATE output
(*2)
OFF
ON
RUN output OFF
ON
BUSY output OFF
ON
Measurement time
Calculation
processing
Image acquisition
CAPTURE
command
(received by Controller)
Accumulated data
(OUT for which hold is set)
Accumulate values according to the hold setting.
Output value according to the hold setting
Accumulate data once every three measurements
operation.book Page 233 Monday, June 6, 2005 10:19 AM