![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335015.webp)
13
Z550
Operation Manual
S
E
CT
IO
N 1
Fea
tures
of th
e Con
tr
o
ller
SECTION 1
Features
Simple Setup Using Menus
The Controller is equipped with two types of menus.
How to switch between the menus p.175
Monitoring While Viewing the Measurement Status
It is possible to visually keep track of how a workpiece is being detected on the monitor screen.
It is also possible to output the displayed profile (distribution of height measurement values) to a
PC.
Twelve Types of Measurement Items
The Controller allows selection from 12 different measurement items, such as height, width, and
cross-sectional area, according to the specific purpose.
Simultaneous measurement of up to 8 items can be performed.
p.70
If this is the first time you
operate the Controller
If you want to set up the
measurement conditions
as you wish by utilizing
various functions
Please use the
conversational menu
.
You can set up the measurement conditions with ease
by simply entering the information according to the
operation guidance that appears on the screen.
p.32
Please use the
expert menu
.
It is possible to switch to the expert menus after setting
up the conditions by using the conversational menu in
order to make further adjustments.
p.47
Scn 0
䂯
Run
䂯
99.60ms
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
[
15
]
[
170
]
[ ]
[ ]
Sensor
Line beam
Profile
operation.book Page 13 Monday, June 6, 2005 10:19 AM