29
Z550
Operation Manual
SE
CTION 2
Sc
reen
Type
s a
nd Dis
p
la
y M
e
tho
d
s
SECTION 2
Basic Operations
Trend Display
The measurement value at the trend cursor position is displayed in a time series.
Press the TRIG Key to switch between display update and stop.It is also possible to specify the
timing via an external trigger.
How to change the cursor position p.155
Other Display Items
Trend Cursor
The units corresponding to 1 division (1 div) on the
waveform display are displayed. If the setting is
changed, the display also changes. Use these values
as reference when displaying the waveform.
1div
V:Measurement value(mm)
T:Second(s)
Conversion values for X and Y axes
Low
High
Time(s)
Waveform display status
During waveform display, (green) is displayed.
While the waveform is stopped, (red) is displayed.
Scn 0
䂯
䂯
Run
䂯
1div T: 0.996 [s]
V:0.1250[mm]
PASS
mm
+005.188000
99.60ms
Sen 0
䂯
Thru
Measurement
value
Judgment result
Screen Mode
Thru: The waveform is displayed continuously.
Trig: The waveform is updated when
the trigger turns ON.
Sensor number
The current sensor number is displayed.
(Sen 0, Sen 1)
operation.book Page 29 Monday, June 6, 2005 10:19 AM