![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335120.webp)
118
S
E
CT
ION 3
Se
tting
Tr
igg
e
r for
H
o
ld
M
eas
ur
em
ent
Z550
Operation Manual
SECTION 3
Setting Measurement Conditions (Expert Menu)
Setting Trigger for Hold Measurement
The hold function allows maintaining a certain value obtained during a measurement from the start to end
of the measurement. How the timing to start and end the measurement should be entered, is selected
here. It is possible to specify the timing at the following four points.
Select the measurement value hold condition for each output.
p.111
Start of measurement
Trigger ON
End of
measurement
Hold measurement period
Trigger OFF
Output held values.
Trigger
Value
Terminal block output
Analog output
OFF
ON
Direction of
workpiece
movement
Output the held characteristic quantity
at this timing.
The characteristic quantities of the
measurement values output during
this period are held.
The time difference between the position
where the trigger turns on and the
measurement position,
if any, can be specified.
Start of
measurement
Trigger ON
End of
measurement
Trigger OFF
operation.book Page 118 Monday, June 6, 2005 10:19 AM