![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335069.webp)
67
Z550
Operation Manual
S
E
CT
ION 3
Se
tting
the
Workp
iece
Pos
ition
Detec
tion
M
ethod
SECTION 3
Setting Measurement Conditions (Expert Menu)
Inclination Compensation
Set the area for measuring the inclination. The measurement value at this point is registered as
the reference position; therefore, place the workpiece at the correct position before you start
settings.
1.
Select [Detect set/Slant correct/Reference].
Sensor
Set the regions in such a way as
to enclose the ranges where the heights
of two points can be measured.
Registered as
the reference
Height 1 (x1, z1)
Height 2 (x2, z2)
The profile data is calculated so that the two positions
become horizontal, compensating for the inclination.
Regions for measuring the amount of position shift
Scn 0
䂯䇭
Set
䂯
Image
Detect set
Meas set
Extra set
Meas mode
Output
Height
䇭䇭㩷㩷㩷㩷䂯
Slant correct
Height & Pos
None
䇭䂯
Reference
operation.book Page 67 Monday, June 6, 2005 10:19 AM